TLDR
The Hydrator Max routes byproduct gas from electrolysis, including trace chlorine and ozone, out through a dedicated vent instead of letting it dissolve into your water. Level Up Way states their SPE/PEM system removes ozone and chlorine, but their site does not describe a dedicated vent mechanism (their site, Aug 2026). Here's why venting is one of the most important safety specs on any hydrogen bottle.
Why venting matters more than the ppb number
Electrolyzing water does not only produce hydrogen. Depending on the water source and the setup, it can also produce trace amounts of chlorine and ozone as byproducts.
A bottle without a dedicated vent has nowhere for that byproduct gas to go except back into the water you are about to drink.
This is the single spec people ask about least and should probably ask about first. A high ppb number on its own does not tell you whether the process that produced it was designed to keep byproduct gas separate from your water.
A bottle without a dedicated vent has nowhere for that byproduct gas to go except back into the water you are about to drink.
Marketing copy in this category tends to spend most of its space on the ppb number, since it is the easiest thing to put in a headline. Venting is a mechanical design choice, harder to photograph, easier to leave out of a listing entirely. That is why it gets overlooked.
That does not mean it is a minor detail. It is closer to the difference between a car with a catalytic converter and one without. Both might run, but only one is designed with the exhaust in mind.
Our venting design
Here is the full picture of how the Hydrator Max handles electrolysis and its byproducts, in one place.
| Spec | Hydrator Max |
|---|---|
| Electrolysis type | Certified SPE/PEM, platinum-plated electrode |
| Waste-gas handling | Dedicated vent, gas expelled, not dissolved |
| Recommended water | RO, distilled, or filtered |
| Water to avoid electrolyzing | Water with added salts or powders, mix those in after the cycle |
Level Up Way's site states their SPE/PEM system removes ozone and chlorine, though they do not describe a dedicated vent mechanism the way we do (their site, Aug 2026). Level Up Way publishes this on levelupway.com, retrieved August 2026; specs change, so their page is the source of truth.
Questions to ask about any bottle's venting
You do not need to be an engineer to ask good questions here, you just need a short list on hand before you check out.
- Does the listing use the word "vented" or "vent" anywhere at all
- Is there a visible vent opening on the unit itself
- Does the brand explain what happens to chlorine and ozone during a cycle
- Can you find any clear documentation of the venting design
If you cannot get a straight answer to the first three questions, treat that as useful information on its own. A brand confident in its venting design usually says so plainly.
Who backs the bottle if something goes wrong?
We stand behind the Hydrator Max with a 30-day risk-free trial and USA-based support. If you are evaluating any bottle's safety claims, including ours, ask for that in writing before you buy.
We have shipped more than 12,000 bottles built around this vented design. That is not a claim about anyone else's product, it is just the number behind the design choice we made and kept.
FAQ
Why does electrolysis produce chlorine and ozone?
Splitting water with an electric current can generate trace byproduct gases alongside hydrogen, depending on the water source and the electrolysis setup used. It is a normal part of the chemistry, not a defect.
Is unvented hydrogen water a safety concern?
A vent reduces the chance of byproduct gases like chlorine and ozone dissolving into your water alongside the hydrogen. That is why we consider venting a core safety feature on any bottle, not an optional add-on.
Does Level Up's bottle vent waste gas?
Level Up Way states their SPE/PEM system removes ozone and chlorine, but their site does not describe a dedicated vent mechanism as of Aug 2026. Ask their support team directly if that distinction matters to you.
What water should I use in the Hydrator Max?
RO, distilled, or filtered water. Do not electrolyze water with added salts or powders, mix those in after the cycle finishes.
Want a bottle built around venting from the ground up? Try the Hydrator Max for 30 days, risk-free.
⚕️ Clinicians' Choice
2,033 clinicians share Dr. Water on VerifiedMD without compensation.
